|
Mechanisms for clamping papers and leafing through a file.
The lever arch mechanisms for files are made of high quality nickel plated and satin finished materials, assuring constant rigidity and protected against corrosion.
They conform to the international standard, the spacing between the perforation being 8 cm.
Base plates with different perforations – different positions of riveting holes:
| series/dimension |
E
|
F
|
G
|
O
|
D
|
 |
| C |
54,1 |
83,5 |
32,0 |
6,0 |
3,8 |
| E |
53,0 |
83,5 |
31,5 |
4,1 |
4,2 |
| F |
53,0 |
83,5 |
31,5 |
4,1 |
3,8 |
| K |
60,0 |
82,5 |
36,0 |
4,4 |
3,4 |
| L |
53,0 |
83,5 |
31,5 |
4,1 |
4,5 |
Right side opening
(European style) |
Left side opening
(Arabic style)
|
 |
| Type |
V (height) |
KA (capacity) |
Type |
| M 80 |
79 mm
|
63 mm
|
M 80L |
| M 75 |
72 mm
|
56 mm
|
M 75L |
| M 55 |
55 mm
|
40 mm
|
M 55L |
| M 50 |
50 mm
|
35 mm
|
M 50L |
In standard performance, mechanisms and compressor-bars, they are made of satin finish materials (Ra = 2,5 microns). On special request, they can be made also from stone finish materials (Ra = 0,25 - 0,45 microns).
 
|
PUSH COMPRESSOR »A«
- metal button
- For fixing papers clamped in the mechanism. Papers remain level when the file is in the upright position.
|
|
|
PUSH COMPRESSOR »B«
- plastic button
- For fixing papers clamped in the mechanism. Papers remain level when the file is in the upright position.
|
|
Rivets for fixing mechanisms into files.
Item number
|
A
|
B
|
C
|
|
| 301642 |
Ø 10,0 |
Ø 3,0 |
7,0 |
rivets for semi automats
|
| 302319 |
Ø 7,0 |
Ø 3,0 |
7,0 |
self-cutting rivets for HANG lines
|
| 302427 |
Ø 7,0 |
Ø 3,5 |
6,9 |
low rivets for KUGLER lines
|
| 302396 |
Ø 8,2 |
Ø 3,35 |
9,0 |
high rivets for KUGLER lines
|
Slide-in-plate for subsequent fixing of a mechanism into a file. It is intended especially for a long transport of files (ocean-going transport or transport of files that is longer than 900 km) as a three times larger quantity of files is transported in this manner than usual.
Slide-in-plate measurements with positions and diameters of riveting holes:
| series / dimension |
E
|
F
|
G
|
D
|
 |
| E |
53,0 |
83,4 |
31,4 |
4,2 |
| F |
53,0 |
83,4 |
31,4 |
3,8 |
| L |
53,0 |
83,4 |
31,4 |
4,5 |
| |
Finger-rings for easier pulling out of files from shelves.
| Item number |
A
|
B (inside meas.)
|
C
|
 |
| 302302 |
Ø 30,0 |
Ø 24,4 |
5,4 |
| 302318 |
Ø 29,0 |
Ø 23,5 |
5,4 |
| 302281 |
Ø 29,0 |
Ø 24,9 |
5,2 |
Oval-rings for providing a closed file position of self-standing files.
| Item number
|
A
|
B
|
C
|
D
|
E
|
F
|
 |
| 302301 |
41,5 |
37,6 |
7,7 |
5,0 |
12,5 |
8,2 |
| 302280 |
41,5 |
37,45 |
8,6 |
5,0 |
12,5 |
7,95 |
| 302405 |
41,5 |
37,45 |
8,3 |
5,0 |
12,5 |
7,95 |
Tools for clenching oval and finger-rings – tools for clenching individual ring types into files.
 
Tools for clenching self-cutting rivets – for the HANG line.
|
Stationery 
