Niko d.o.o., Železniki - Proizvodnja mehanizmov za registratorje, papirnih in paličnih sponk, zabijalnih aparatov, jeklenih vlaken za betone, orodjarstvo, strojegradnja

Main menu

Steel fibres

NIKO Staplers

Products for Upholstery and Wood Industry

Service and application RB

NIKO, Ltd, ÄZelezniki
Kidriceva c. 75
4220 Skofja Loka

Tel.: +386 4 / 51 30 814
Fax: +386 4 / 51 30 813

Application
The Re-bar Tying Tool is a novelty on our market. The tool is battery powered and it is suitable for use in all weather conditions and independent of power sources. Two batteries are enclosed, which enable 360 – 420 ties/charge. The recharge time is very short, approximately 25 minutes. The tying tool can be used in any place where clearances of reinforcement allow access with the tool. It binds quickly, effectively and without user's effort.
Prior to its use, read the manual, describing all the functions and the use of the power tool. You have to be familiarized with operating instructions, which are described in detail in the manual.

RB 215

Re-Bar Tying Tool MAX RB 215

	Model:	RB 215
	Weight:	2,1 kg
	Dimensions:	276 X 99 X 200 mm
	Wire diameter:	ø 0,8 mm
	Wraps per tie:	3 wraps / tie
	Ties per charge:	360 Bindungen / kostenlos
	Turn diameter:	to ø 10 x ø 10 mm
	Tying speed:	less than 0,8 sec/tie
	Approximate no. of ties / coil:	180 – 210
	Battery type:	Ni-Cd 9,6V (JP409)

	Recharge time:	25 min

RB 395

Re-Bar Tying Tool MAX RB 395

	Model:	RB 395
	Weight:	2,1 kg
	Dimensions:	276 x 99 x 284 mm
	Wire diameter:	ø 0,8 mm
	Wraps per tie:	3 wraps / tie
	Ties per charge:	360 ties / charge
	Turn diameter:	from ø 10 x ø 10 mm to ø 16 x ø 16 mm
	Tying speed:	less than 1 sec/tie
	Approximate no. of ties / coil:	120
	Battery type:	Ni-Cd 9,6V (JP409)

	Recharge time:	25 min

RB 515

Re-Bar Tying Tool MAX RB 515

	Model:	RB 515
	Weight:	2,4 kg
	Dimensions:	295 x 102 x 306 mm
	Wire diameter:	ø 0,8 mm
	Wraps per tie:	3 – 4 Wraps / tie
	Ties per charge:	360 ties / charge
	Turn diameter:	from ø 16 x ø 16 mm to ø 22 x ø 25 mm
	Tying speed:	less than 1 sec/tie
	Approximate no. of ties / coil:	90 (3 ties). 75 (4 ties)
	Battery type:	Ni-Cd 9,6V (JP409)

	Recharge time:	25 min

RB 655

Re-Bar Tying Tool MAX RB 655

	Model:	RB 655
	Weight:	3,3 kg
	Dimensions:	340 x 100 x 340 mm
	Wire diameter:	ø 1,5 mm
	Wraps per tie:	1 wraps / tie
	Ties per charge:	420 ties / charge
	Turn diameter:	from ø10 x ø10 mm ø13 x ø16 x ø36 mm ø13 x ø25 x ø25 mm ø19 x ø22 x ø22 mm to ø25 x ø29 mm
	Tying speed:	less than 1.1 sec/tie
	Approximate no. of ties / coil:	110 – 210 ties / coil
	Battery type:	Ni-MH 9,6V (JP509H)

	Recharge time:	30 min

[ Back ]

ESRR Project

Project: Development, Industrialization and Informatization of Highly Productive Assembly Processes.

PDF file about the project: Development, Industrialization and Informatization of Highly Productive Assembly Processes

The project is partially financed by the European Regional Development Fund

Projekt delno sofinancira Evropski sklad za regionalni razvoj

Quality Certification

The company NIKO Ltd has obtained the ISO 9001 and 14001 quality certificates.

How to reach us

We have prepared a few variants of active maps on how to reach our company.

Map of najdi.si search engine.

Map on Google.com/maps.

Map on Yahoo.com (Map of Slovenia is not complete, however the functions of route drawing between two locations and route description are useful).